::: نرم افزارهای رشته عمران :::

[معمار]

نرم افزارهای رشته عمران
در این بخش نرم افزار هایی که مربوط به رشته عمران هست رو قرار می دم
امیدوارم به کارتون بیاد:!::arrow::!:

[ArasH]

Tekla Structures v13 ISO







نرم افزاری عالی برای مهندسین عمران و سازه می باشد که با مدل کردن ۳بعدی از انها قادر به انالیز و طراحی تمامی سازه ها می باشد . این نرم افزار به عنوان یکی از مراجع جهت رسم دیتایلهای اجرایی سازها می باشد .


Tekla Structures software is a building information modeling (BIM) tool that streamlines the delivery process of design, detailing, manufacture, and construction organizations. While integrating openly with models, the strength of this single-model environment lies in the contractor end of the process. Thousands of Tekla Structures software users in more than 80 countries have successfully delivered BIM-based projects across the world.
Tekla Structures' ability to process extensive amounts of data offers the possibility to create a detailed 3D model that applies to every stage of design and construction. From planning and thru to fabrication and installation, Tekla models naturally develop in parallel, representing the "as-built" condition of a building. Tekla Structures effectively integrates into any best-of-breed software driven workflow, while maintaining the highest levels of data integrity and accuracy. Such collaborative workflows are the cornerstone to minimizing errors and maximizing efficiency , resulting in high profitability and on-time project completion. Tekla Structures encompasses specialized configurations for structural engineers, steel detailers and fabricators, precast concrete detailers and manufacturers, as well as contractors.



FileFactory

Size : 810 MB
Full App

http://www.filefactory.com/file/1076c3
http://www.filefactory.com/file/b702a5
http://www.filefactory.com/file/204029
http://www.filefactory.com/file/4a470c
http://www.filefactory.com/file/6beca5
http://www.filefactory.com/file/7f7b0e
http://www.filefactory.com/file/ec44f7
http://www.filefactory.com/file/6b8c99
http://www.filefactory.com/file/2f9b6b
http://www.filefactory.com/file/d697b4
http://www.filefactory.com/file/f78571

[ArasH]

SEC-PRO



نرم‌افزار تخصصی SEC-PRO (جهت محاسبه مشخصات مقاطع مرکب فولادی)
شرح برنامه‌ها:

این بسته‌ی نرم‌افزاری مجموعه‌ای از 13 نرم‌افزار است که برای محاسبه مشخصات مقاطع مرکب فولادی قابل استفاده است، برنامه‌های این مجموعه به شرح زیر است:

1- SEC-PRO1 (دو مقطع IPE به همراه ورقهای تقویتی)

2- SEC-PRO2 (سه مقطع IPE به همراه ورقهای تقویتی)

3- SEC-PRO3 (سه مقطع IPE به شکل مقطع H به همراه ورقهای تقویتی)

4&5- SEC-PRO4 & SEC-PRO5 (دو مقطع IPE & CPE به همراه ورقهای تقویتی)

6- SEC-PRO6 (یک مقطع IPE & CPE به همراه ورقهای تقویتی)

7- SEC-PRO7 (دو مقطع ناودانی و ورقهای تقویتی)

8&9- SEC-PRO8 & SEC-PRO9 (دو مقطع نبشی و ورقهای تقویتی)

10- SEC-PRO10 (تیرورق با مقطع I و ورقهای تقویتی)

11- SEC-PRO11 (تیرورق با مقطع جعبه‌ای و ورقهای تقویتی)

12- SEC-PRO12 (مقطع جعبه با 4 نبشی و ورقهای تقویتی)

13- SEC-PRO13 (تیرورق با مقطع صلیب با ورقهای تقویتی)


DirectLink

Size : 2.27MB

http://rasulhajian.persiangig.com/omrancivil/narm%20afzar/SEC_PRO.zip

منبع :

P30world.com-------binyaz.com

[Researcher]

نرم افزار Graphisofts ArchiCAD ، نرم افزاری بسیار قدرتمند با قابلیت های جدید جهت طراحی و پیاده سازی محیط های سه بعدی است و فراهم کننده مدل های حرفه ای مجازی جهت مهندسین عمران و معماری است. کاربران با کمک نرم افزار ArchiCAD طرح های خود را سریعتر آنالیز می کنند این کار با استفاده از تخمین خصوصیات فضای طراحی در محیطی سه بعدی صورت می گیرد و سریعا گزارشی دقیق از کل پروژه به صورت مستند برای کاربر تولید می شود. محیط کاری این نرم افزار بگونه ای است که کاربران احساس طراحی در دنیای واقعی را دارند و این احساس ناشی از ابزار و پلت ها و مدل های سه بعدی مانند پله ها، مبلمان و اثاثیه و ... است. از دیگر خصوصیت این نرم افزار فرامین ترسیمی پیشرفته این نرم افزار می باشد.

قابلیت های کلیدی نرم افزار Graphisofts ArchiCAD 11:
- قابلیت طراحی در فضای سه بعدی
- ایجاد ساختمان مجازی و ذخیره کلیه اطلاعات آن در یک پایگاه داده مرکزی
- قابلیت ساخت کلیه عناصر سه بعدی مانند در و پنجره و ستون و ...
- گزارش گیری پیشرفته
- توانایی کنترل کامل پروژه در هنگام انتقال از فضای دو بعدی به فضای سه بعدی و برعکس
- امکان بردن طرح های مجازی به دنیای واقعی با اتصال به Google Earth
- و ...

قیمت: 4250 دلار آمریکا
پسورد: www.p30download.com
دانلود Graphisofts ArchiCAD 11 - سرور راپید شیر
دانلود - 350 مگابایت (بخش اول) | دوم | سوم | چهارم

دانلود Graphisofts ArchiCAD 11 - سرور پی سی دانلود
دانلود - 350 مگابایت (بخش اول) | دوم | سوم | چهارم

سايت سازنده
لينک منبع

[Researcher]

Acme CADSee نرم افزاري جالب و قدرتمند از سري محصولات مهندسي كمپاني Firestudio است كه به شما امكان مشاهده , مرور و پرينت فرمت هاي مختلف DWG/DXF/DWF(AutoCAD R2.5-R2006), PSD, BMP, JPEG, TIFF, PCX, GIF, PNG, MNG, TGA, PCX, ICO, WMF را در ويندوز ميدهد. اين نرم افزار شما را از نصب برنامه هاي مختلف همچون فتوشاپ و اتوكد بي نياز كرده و به تنهايي از بسياري از فرمت هاي مورد استفاده كاربران ويندوز را پشتيباني ميكند.

برخی از ویژگی های این نرم افزار عبارتند از:
- قابليت باز نمودن انواع فايل هاي DXF, DWG و DWF
- شناسايي دقيق نوع فونت ها و رنگ آن ها
- پضشتيباني از انواع فرمت هاي تصويري BMP, JPEG, GIF, PCX, TGA, TIFF, MNG, PNG, PSD, WMF و ICO
- پشتيباني از نمايش تمام صفحه موسوم به Screen mode ( كليد F)
- پشتيباني از چاپ و چاپگر ها
- داراي دو محيط كاربري متفاوت
- پشتيباني از ويندوز هاي Windows95/98/ME/NT/2000/XP بدون نياز به برنامه AutoCAD

دانلود - 3.47 مگابایت
پسورد: www.p30download.com
Serial: 55ACXACWWXFS2XVEEBCOQRMKFPP84IO
تصویر محیط برنامه
سایت سازنده
لینک منبع

[Researcher]

Acme CAD Converter
اگر از اتوکد برای طراحی استفاده میکنید این برنامه را از دست ندهید، این برنامه با تغییر فورمت فایل های DXF,DWF, DWG به BMP, GIF,JPEG,PCX, DXF, DWG, SVG,SVGZ,CGM,EPS,PDF, HPGL(PLT,HGL),PDF کار شما را بسیار راحت میکند و شما قادر خواهید بود طرح های خود را به هر کجا که خواستید ببرید و با آنها مثل عکس ها و یا تصاویر برداری کار کنید!

دانلود - 2.5 مگابایت
سریال: lCAkA~~lV`A+\=9_l<KE,A[WBKp5wuP1sb-48-}`eW]?U:wn1f

[Researcher]

Solid Converter DWG
اگر شما با نرم افزار اتوکد کار میکنید، حتماً برای شما پیش آمده است، که بخواهید طرح خود را دنبالتان ببرید و در کامپیوتر دیگری آن را ببینید ولی بر روی آن کامپیوتر اتوکد نصب نبوده و نتوانسته باشید طرح خود را باز بینی کنید، این نرم افزار با تبدیل فورمت های DWG و DXF به فورمت عمومی PDF مشکل شما را حل میکند. با تبدیل به فورمت PDF همه جا میتوانید طرح های خودتون را ببینید.

دانلود - (غیر مستقیم) - 11.6 مگابایت

[ArasH]

Dimslon mat3d

• نرم افزاری برای طراحی پی های مرکب Dimslon mat 3d v.3.8.8

http://www.4shared.com/file/48858382/23c9b267/Dimmat3dpart1.html
http://www.4shared.com/file/48859278/fdfa4ae4/Dimmat3dpart2.html
http://www.4shared.com/file/48859908/beee33c2/Dimmat3dpart3.html

[ArasH]

TEKLA STRUCTURES v14



Tekla Structures v14
Tekla Structures software is a building information modeling (BIM) tool that streamlines the delivery process of design, detailing, manufacture, and construction organizations. While integrating openly with architectural models, the strength of this single-model environment lies in the contractor end of the process. Thousands of Tekla Structures software users in more than 80 countries have successfully delivered BIM-based projects across the world.

732 MB | ISO Image | 16x50 MB RAR split with sfv | FF








BIM solution for construction management

Managing the fragmented project planning and performance data is a challenge in streamlining the delivery process of construction organizations. Tekla Structures software helps to plan, communicate, and manage project information and thereby effectively supports Building Information Modeling (BIM). The Tekla model can be used to store all the structural data from preconstruction, construction planning through to site management and to monitor performance from design to supply and installation.
Plan, communicate and manage project information

Tekla Structures for construction management is an information-model-based software solution that supports contractors, sub-contractors, and project management professionals by helping them to centralize and visualize project data. Scheduling and cost estimation and control can be carried out by an effective communication and decision-making process that results from managing the fragmented nature of both project planning and performance data.

Tekla Structures can process large amounts of model and non-model data regardless of the source. The software can be used to leverage the critical transfer of design information and planning data between design and construction teams. This clarifies communication and decision-making throughout the design, construction, and site management phases of a building project.

Preconstruction

The critical objectives to meet during the preconstruction phase of a building project are:

* Understanding owner expectations
* Interpreting design intent

Tekla (BIM) process combines both building geometry and its element-specific properties to help construction managers reach these objectives. Sophisticated design and reporting tools allow the user to illustrate various levels of completeness to quantify the variety of alternative design proposals.

Tekla Structures software effectively enhances communication among project participants to realize design intent and ultimately meet owner expectations.

The Tekla model can be used to

* Determine the complexity of the project
* Extract quantities
* Determine project budgets, general schedules, and resource availability
* Associate lead times, delivery dates, methods, and materials
* Understand the scope of labor and materials


Construction planning

The transition from preliminary estimates to procuring and coordinating actual project resources starts once a project is awarded.

Tekla Structures software ensures that perspectives on scope and schedule dates are clearly communicated. Publishing and sharing the model on the web enhances efficient design which translates into easier and faster fabrication. Tekla's construction management solution enables a well-informed and streamlined procurement process and facilitates accurate cost control during the production and delivery stages of the project.

Interoperability is essential, especially during construction planning. Use of the Tekla Open API™ helps to centralize and distribute the critical exchanges of data that control production and eventually activate the supply chain.

The Tekla model can be used to

* Share building information with other disciplines
* Divide the building into procurement packages
* Visualize site layout, shapes, and geometry
* Plan equipment and quantities utilizing resource data for further calculations
* Generate a constructability analysis throughout design and delivery
* Intelligent detailing design management


BIM solution for structural engineering
Tekla offers structural engineers a Building Information Modeling (BIM) solution that supports construction from conceptual design through to fabrication, erection, and site management.

Tekla Structures software is a more efficient way of working for structural engineering offices. It includes a complete set of tools for working with other disciplines, enabling structural engineers to compete for more complex and prestigious contracts

http://www.filefactory.com/file/337fc4/n/graf1033_r00
http://www.filefactory.com/file/c20346/n/graf1033_r01
http://www.filefactory.com/file/4be8b6/n/graf1033_r02
http://www.filefactory.com/file/6865da/n/graf1033_r03
http://www.filefactory.com/file/7ee0e7/n/graf1033_r04
http://www.filefactory.com/file/3b7196/n/graf1033_r05
http://www.filefactory.com/file/b5a9e0/n/graf1033_r06
http://www.filefactory.com/file/663047/n/graf1033_r07
http://www.filefactory.com/file/9b89cc/n/graf1033_r08
http://www.filefactory.com/file/0d2629/n/graf1033_r09
http://www.filefactory.com/file/78ea7e/n/graf1033_r10
http://www.filefactory.com/file/6baaf5/n/graf1033_r11
http://www.filefactory.com/file/490764/n/graf1033_r12
http://www.filefactory.com/file/1daf1b/n/graf1033_r13
http://www.filefactory.com/file/7026d2/n/graf1033_r14
http://www.filefactory.com/file/d57821/n/graf1033_rar
http://www.filefactory.com/file/45a2db/n/graf1033_sfv_rar

[ArasH]

CSi SAP2000 v12.0.0 advanced





Size: 260 MB


Description:
Computers & Structures, Inc. is proud to announce the release of SAP2000, version 12. The innovative enhancements in this version are categorized below. This fully integrated product for the modeling, analysis and design of structures continues to be available in three levels: Basic, Plus and Advanced.


Please contact sales@csiberkeley.com for more information.


MODEL-ALIVE™ Option in
Show me how Model-Alive works
http://csiberkeley.com/Watch&Learn/Model_Alive_V12S.wmv


• True to our tradition, we are once again advancing the state-of-the-art of numerical analysis with the introduction of the Model-Alive™ feature in SAPFIRE™ ~ CSI's Analytical Engine. Taking advantage of current advances in numerical methods and hardware technology, this option provides instantaneous re-analysis and updating of the displays following any change the user makes to the model.

Multi-Processor / Multi-Threading Analysis Solvers

• Fast, fast, fast analysis times and unmatched solution capacity
• New 64 bit multi-processing/multi-threading algorithms

(Bridge Information Modeler) Enhancements
Show me how BrIM works
http://csiberkeley.com/Watch&Learn/BrIM_V12S.wmv

• Design for AASHTO LRFD 2007 added for concrete box girder bridges
- Checks include, shear, flexure and principal-stress
Show me Concrete Box Girder Design
http://csiberkeley.com/Watch&Learn/B...esign_V12S.wmv


• Additional AASHTO, Caltrans and JTG vehicles are now available
• BrIM allows temperature loading including nonlinear thermal gradients
• Enhanced BrIM wizard with more detail and guidance
• Templates now have a quick BrIM option for instantaneous bridge model generation
• Enhanced and simplified span definitions
• Improved abutments with separate bearings, abutment seat and soil properties
• Improved bents, allowing single or dual sets of bearings
• Superstructure may be continuous or discontinuous over bents
• Enhanced control of location, alignment, and properties of bearings
• Enhanced control over restrainers at abutments, bents, and hinges


Staged Construction Enhancements
Show me staged-construction using Gantt charts
http://csiberkeley.com/Watch&Learn/S...Sched_V12S.wmv

• Automatic generation of staged-construction stages using standard Gantt charts
• Stage construction groups may now be defined as part of the bridge object
• Control is by individual objects as well as by groups
• Frame end release assignments can be changed
• Property modifiers for frames, tendons and shells can be changed
• Section properties for frames, tendons and shells can be changed

Section Designer Enhancements

• Moment curvature curve and PMM interaction surface for arbitrary fiber sections
• Enhanced control over material properties, including Mander model for all sections
• Graphical User Interface allows for overlapping shapes and improved Boolean operations
• Properties for concrete-only sections, steel encased sections and steel-only sections
• Properties for CalTrans bridge sections, with or without prestressing tendons
• Enhanced performance and efficiency

New Analysis and Design Code Related Enhancements

• Hyperstatic analysis for secondary effects of prestressing forces
• Soil (area) springs can now be tension-only or compression-only springs
• AISC 360-05/IBC2006 steel-frame design code, with seismic provisions
• Direct Analysis Method of AISC 360-05 code
- Includes small P-delta effect
- Automated inclusion of stiffness modification factors, with user control
- Design-decision guidance on when Direct Analysis Method is needed
• CAN/CSA-S16-01 steel-frame design code, including seismic provisions
• Enhanced design of eccentrically braced frames for AISC 360-05/IBC 2006
• Canadian NBCC 2005 wind loads, seismic loads, and response-spectrum functions
• Load combinations can be converted to nonlinear load cases for advanced design
• Improved automated load combinations for design
• Enhanced display of failure modes for steel-frame design
• Open structure wind loading for the API 4F 2008 code

Automated, Predefined and Customized Report Generation

• Quick and easy generation of final printed reports with complete user control
• Cover sheet identifying project, user and company
• Formatted tables of model definition, analysis and design results
• Typical graphical displays of the model
• Output sheets of detailed design information

Other Enhancements to the Graphical User Interface (GUI)

• User created documents now can be accessed through the SAP2000 Help menu
• Export of geometry and element connectivity to CSI Perform-3D
• Enhanced import of input files from STAAD.Pro, GTSTRUDL, NASTRAN, etc.
• DXF export for finite element stress contour arrows for 2D and 3D views
• Export structural model data for use with soil-structure interaction product, SASSI
• Faster graphical user interface and enhanced OpenGL graphics

Enhanced Open Application Programming Interface (OAPI) is now Free

• The OAPI for SAP2000 provides developers of products for CADD and 3D modeling seamless and efficient access to all of the sophisticated analysis and design technology of SAP2000. The OAPI can now be used in two different ways. First, OAPI tools developed by third parties can be accessed by the SAP2000 GUI as external plug-ins. Second, using the OAPI, third-party developers can transfer model information to and from SAP2000, trigger the SAP2000 execution and extract analysis and design information from SAP2000, all from within their application. The OAPI feature is now free with every SAP2000 license.

Minimum and Recommended System Requirements

• Processor: Minimum: Intel Pentium 4 or AMD Athlon 64. Recommended : Intel Core 2 Duo,
AMD Athlon 64 X2, or better (see notes 1 and 2 below)
• Operating System : Microsoft® Windows XP with Service Pack 2 or Microsoft® Windows
Vista, 32- and 64-bit versions. (see notes 3 and 4 below)
• Memory : Minimum: 1 GB for XP O/S, 2 GB for Vista O/S. Recommended : 2 to 4 GB for
32-bit O/S, 4 GB or more for 64-bit O/S. (see note 5 below)
• Disk Space: 6 GB to install the program, additional space required for running and
storing model files and analysis results.
• Video Card : Supporting 1024 by 768 resolution and 16 bits colors. Recommended : discrete
video card with ATI / NVIDIA GPU & dedicated graphics RAM. (see note 6 below)


Notes:
1) To be able to take advantage of the features of the newer CPU's, SAP2000 v12 will not run on
some of the older CPU's from Intel and AMD. A CPU that has SSE2 support is now required.
2) SAPfire™ Analytical Engine now includes a multi-threaded solver that can take
advantage of the newer multi-core CPUs.
3) Support for Microsoft® Windows 2000 and Microsoft® Windows NT has been discontinued.
Microsoft® Windows XP without Service Pack 2 may cause unexpected problems
when running SAP2000 v12.
4) With a 64 bit operating system, SAPFIRE™ Analytical Engine can utilize more than 4 GB of
RAM, making it possible to more efficiently solve larger problems.
5) The problem size that can be solved & the solution speed increases considerably with more
RAM. Vista requires more RAM than XP for the operating system itself.
6) OpenGL graphics mode fully utilizes the hardware acceleration provided by a GPU
& dedicated graphics RAM.

SAP2000 v12 Features Categorized by Levels Click Here
http://csiberkeley.com/SAP2000_news/...eatures_08.pdf
--------------------------------------------------------------------------------

For further information contact CSI sales department at:

Telephone: 510 649-2200, Option 1
email: sales@csiberkeley.com or visit: http://csiberkeley.com/sales_products.html
--------------------------------------------------------------------------------

Computers & Structures, Inc. • 1995 University Ave. Suite 540, Berkeley, CA 94704 USA
Tel: (510) 649-2200 • Fax: (510) 649-2299


Home Page

www.csiberkeley.com

http://rapidshare.com/files/135438745/www.damasgate.com-_firebird-SAP2000_V12.part1.rar
http://rapidshare.com/files/135443639/www.damasgate.com-_firebird-SAP2000_V12.part2.rar
http://rapidshare.com/files/135448211/www.damasgate.com-_firebird-SAP2000_V12.part3.rar
http://rapidshare.com/files/135452814/www.damasgate.com-_firebird-SAP2000_V12.part4.rar
http://rapidshare.com/files/135457355/www.damasgate.com-_firebird-SAP2000_V12.part5.rar
http://rapidshare.com/files/135458195/www.damasgate.com-_firebird-SAP2000_V12.part6.rar
password : firesap

Mirror

http://www.filefactory.com/file/5553a8/n/SAP2000_V12_part1_rar
http://www.filefactory.com/file/ded3a2/n/SAP2000_V12_part2_rar
http://www.filefactory.com/file/7b78b2/n/SAP2000_V12_part3_rar
http://www.filefactory.com/file/3e1fa3/n/SAP2000_V12_part4_rar
http://www.filefactory.com/file/98bc68/n/SAP2000_V12_part5_rar

OR
http://www.savefile.com/files/1707197
http://www.savefile.com/files/1707253
http://www.savefile.com/files/1709061
http://www.savefile.com/files/1709115
http://www.savefile.com/files/1709131

Patch

http://rapidshare.com/files/138516263/patch_sap2000_v.12.rar